[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:DECmcc user notes file. Does not replace IPMT.
Notice:Use IPMT for problems. Newsletter location in note 6187
Moderator:TAEC::BEROUD
Created:Mon Aug 21 1989
Last Modified:Wed Jun 04 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:6497
Total number of notes:27359

1002.0. "Ethernet AM problem" by WOTVAX::PURNELLR (...all this now !) Mon May 13 1991 09:06

    
    Installing Ethernet AM from the 1.1 kit.
    
    It does not allow the registration of ethernet devices. The MCC has 
    Phase IV nodes up and being monitored, but every time an ethernet 
    address is registered it responds with "cannot communicate with 
    target". 
    
    This has none of the point products installed, so I do not believe 
    there would be an issue with contention for the ethernet port. I was 
    also specifiying the port ESA0: when registering. (ie via port eas0:).
    
    I am sure it is something basic, but I was unfortunately working blind!
    
    Any help would be appreciated.
    
    Regards,
    
    Rex
T.RTitleUserPersonal
Name
DateLines
1002.1Need more detail...CHRISB::BRIENENDECmcc Bridge|Station|SNMP Management.Tue May 14 1991 12:2714
You haven't supplied enough information for me to help you.

What "ethernet devices" are you trying to register?

Can you supply a sample of the REGISTER syntax you are using?

If you're trying to REGISTER stations that are part of a Phase IV node,
are you apecifying both the DECnet Physical Address and the Hardware
Address?  Are you specifying just the ROM Address?

Can you post the output of the SHOW MCC 0 ETHERNET_AM ALL STATUS
command?

Why are you using VIA PORT?