[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

345.0. "How do you set the line speed?" by ASD::LSMITH () Fri Sep 21 1990 17:34

Hi,

We are running DECmcc V1.1 and have a nameserver running on our cluster. I
have been able to register a node and would like to set the line speed so I
can use the export command to see statistics. How do I do this?

I have tried

	MCC> set node4 crony line qna-0 line speed 10000000
	Node4 crony Line qna-0
	Characteristics
	AT 21-SEP-1990 13:24:49


	Internal error in DECnet Phase IV AM

		      MCC Error = %MCC-E-NOPARENT, parent entity does
		                  not exist


Crony is the node I registered. That worked ok. Is there something else I need
to do to be able to set the line speed?

Thanks in advance,

-- Larry

T.R	Title	User	Personal Name	Date	Lines
345.1	export doesn't display anything	TOOK::SHMUYLOVICH		`Fri Sep 21 1990 20:02`	15
	Larry, What do you mean by > ...so I can use the export command to see statistics. If you want to see statistics just use SHOW node4 crony all statistics. Export command creates a RDB file and writes in it statistics attributes as well as all other attributes for the specified entity. Sorry, I don't know how to set the line speed. Sam
345.2	I mean report on.	ASD::LSMITH		`Fri Sep 21 1990 20:25`	6
	I mean so I can get the reports function to work. Correct me if I'm wrong but I was told the line speed needed to be set in order for the export command to work correctly. -- Larry
345.3	dns registration of NODE4 and LINE entity	NAC::SCHLENER		`Mon Sep 24 1990 17:26`	6
	All you should have to do is register (in DNS via MCC) the NODE4 entity and the line entity. Both must be present before you can set line speed. Cindy
345.4	Does it work?	REDBCK::mike	Mike Dransfield, Sydney RSSG	`Tue Sep 25 1990 00:39`	8
	re: .3 Have you tried it and seen it work? I tried this with IFT 1.1 last week and couldn't get it to work, no matter what I tried. Thanks, Mike
345.5	DNS/MCC does not know about the line speed attribute?	ASD::LSMITH		`Tue Sep 25 1990 13:12`	36
	I registered the line with: MCC> register node4 crony line * Node4 crony Line AT 24-SEP-1990 11:17:25 Registration Successful When I do: MCC> dir node4 crony line * Node4 crony Line QNA-0 AT 25-SEP-1990 08:59:36 Directory successful. Name = QNA-0 Then doing: MCC> set node4 crony line qna-0 line speed 10000000 Node4 crony Line qna-0 Characteristics AT 24-SEP-1990 11:18:49 Internal error in DECnet Phase IV AM. MCC Error = %MCC-E-NOATTRIB, no such DNS attribute There does not seem to be a line speed attribute. Could this be the problem? If so, is it something I'm doing wrong? -- Larry
345.6	go to the source	NAC::SCHLENER		`Tue Sep 25 1990 16:02`	7
	This used to work back in the spring. My suggestion is to either QAR it (if you have access to the QAR system), or send mail to Jim Carey on the TOOK cluster - he's the project leader in charge of the DECnet Phase IV AM. Good luck! Cindy
345.7	Setting Line Speed	TOOK::ANWARUDDIN	Anwar	`Tue Sep 25 1990 16:16`	5
	Please see the section on Performance Analyzer Function Module in the IFT V1.1 Release notes. There is an example on setting Line speed. /anwar
345.8	it's a bug	TOOK::S_KO	Hoot mon!	`Tue Sep 25 1990 17:50`	11
	it is a bug! yes, it did work, but while correcting one aspect of the error handling, we were a little too efficient and did not let the selected errors to pass. this affects setting the line speed of any line that does not already have a value for line speed, or for obtaining characteristic information for a line. it is fixed for the next release. (it does work in V1)
345.9	New PA FM ?	COPCLU::SORENC		`Mon Nov 05 1990 13:16`	8
345.10	Fixed in EFT due out shortly.	TOOK::PELAGATTI	Anne	`Fri Nov 09 1990 11:45`	0