| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 47.1 | | SCRPIO::LIZBICKI | | Thu Feb 01 1990 14:59 | 15 |
|
I had the same problem this morning. I noticed too that the expiration
date in the PAK commenad file was 30-APR-1990, but I have been running
previous versions and assumed the problem was due to an old PAK I loaded.
Anyways, what to do:
$ LICENSE UNLOAD "DECMCC/EXEC"
$ @MCC$EXEC_PAK.COM
You'll get a duplicate license error when you run the command file,
but you will be able to use MCC after it is run.
Lynne
|
| 47.2 | Licenses For MCC Toolkits | TOOK::WONG | | Tue Feb 06 1990 12:59 | 193 |
|
A number of sites that received the MCC Fieldtest (August 21, 1989) and
earlier versions of the "TOOLKIT" were given PAKs (on the kit in saveseta,
installed in directory MCC$SYSTEM, and seperately in .com's on node
KEEL:: where the kits were distributed from). When the Fieldtest upgrade
was distributed (October 30, 1989), new PAKs were generated and again
distributed. The Authorization Numbers and Termination dates for the PAKs
that have been distributed to date are given below. The PAKs for the
DECMCC/EXEC and the DECMCC/TOOLS should currently both be the ones listed
under the Toolkit Field Test Upgrade.
Toolkit Toolkit
Field Test Field Test
Upgrade
____________ ___________
Authorization Number: SQM007487 SQM008527
Product Name: DECMCC/EXEC DECMCC/EXEC
Termination Date: 31-JAN-1990 30-APR-1990
Authorization Number: SQM007485 SQM008526
Product Name: DECMCC/TOOLS DECMCC/TOOLS
Termination Date: 31-JAN-1990 30-APR-1990
To verify this, (and this should be done on satellites of a
non-homogeneous cluster as well), enter the commands:
$ license list "DECMCC/EXEC" /FULL
$ license list "DECMCC/TOOLS" /FULL
The PAKs listed under the Toolkit Field Test should have a status of
Disabled, while the ones listed under the Toolkit Field Test Upgrade
should have a status of Active. A sample display is given below:
$ license list "DECMCC/EXEC" /full
License Management Facility
License Database File: SYS$COMMON:[SYSEXE]LMF$LICENSE.LDB;1
Created on: 25-AUG-1988
Created by user: SYSTEM
LMF Version: V1.0
-----------------------------------
Issuer: DEC
Authorization: SQM007487
Product Name: DECMCC/EXEC
Producer: DEC
Units: 0
Version: 1.0
Date: (none)
Termination Date: 31-JAN-1990
Availability: F (Layered Products)
Activity: 0
Options: MOD_UNITS
Hardware ID:
Revision Level: 10
Status: Disabled
Command: DISABLE
Modified by user: WONG
Modified on: 20-DEC-1989 16:30:31.31
-----------------------------------
Issuer: DEC
Authorization: SQM008527
Product Name: DECMCC/EXEC
Producer: DEC
Units: 0
Version: 1.0
Date: (none)
Termination Date: 30-APR-1990
Availability: F (Layered Products)
Activity: 0
Options:
Hardware ID:
Revision Level: 1
Status: Active
Command: REGISTER
Modified by user: WONG
Modified on: 20-DEC-1989 16:34:31.31
[End Of List]
$ license list "DECMCC/TOOLS" /full
License Management Facility
License Database File: SYS$COMMON:[SYSEXE]LMF$LICENSE.LDB;1
Created on: 25-AUG-1988
Created by user: SYSTEM
LMF Version: V1.0
-----------------------------------
Issuer: DEC
Authorization: SQM007485
Product Name: DECMCC/TOOLS
Producer: DEC
Units: 0
Version: 1.0
Date: (none)
Termination Date: 31-JAN-1990
Availability: F (Layered Products)
Activity: 0
Options: MOD_UNITS
Hardware ID:
Revision Level: 5
Status: Disabled
Command: DISABLE
Modified by user: WONG
Modified on: 20-DEC-1989 16:40:37.23
-----------------------------------
Issuer: DEC
Authorization: SQM008526
Product Name: DECMCC/TOOLS
Producer: DEC
Units: 0
Version: 1.0
Date: (none)
Termination Date: 30-APR-1990
Availability: F (Layered Products)
Activity: 0
Options:
Hardware ID:
Revision Level: 1
Status: Active
Command: REGISTER
Modified by user: WONG
Modified on: 20-DEC-1989 16:44:37.23
[End Of List]
If this is not the case, you will have to disable and unload both of the
Toolkit Field Test PAKs *FIRST*, and *THEN* register and load both of the
Toolkit Field Test Upgrade PAKs. A sample procedure to do this is
included below.
$ ON ERROR THEN $ CONTINUE
$ LICENSE DISABLE "DECMCC/EXEC" /AUTHORIZATION=SQM007487
$ ON ERROR THEN $ CONTINUE
$ LICENSE UNLOAD "DECMCC/EXEC"
$!
$ ON ERROR THEN $ CONTINUE
$ LICENSE DISABLE "DECMCC/TOOLS" /AUTHORIZATION=SQM007485
$ ON ERROR THEN $ CONTINUE
$ LICENSE UNLOAD "DECMCC/TOOLS"
$!
$ ON ERROR THEN $ CONTINUE
$ SET NOON
$ LICENSE REGISTER "DECMCC/EXEC" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM008527 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="30-APR-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-FKLA-FFLC-ANKA-GELF
$ LICENSE LOAD "DECMCC/EXEC"
$!
$ ON ERROR THEN $ CONTINUE
$ SET NOON
$ LICENSE REGISTER "DECMCC/TOOLS" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM008526 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="30-APR-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-HEND-BMHL-OGOM-LBHO
$ LICENSE LOAD "DECMCC/TOOLS"
Please note that when the external end user field test is entered, and new
kits are available, we will embrace the new packaging strategy and a
new set of PAKs will be generated. There will be four of them and they
will have different product names than those used for the toolkits. Also,
they will no longer be available on the kit, or placed in the MCC$SYSTEM
directory. More information will be forthcoming with the announcement of
the kits, as well as in the respective release notes.
Please let me know if additional information or assistance is needed.
We are sorry for any inconvenience experienced due to license expirations.
regards,
\steve
TOOK::WONG
8*226-5344
|
| 47.3 | POST MAY 30TH MCC LICENSES | TOOK::WONG | | Sat Apr 21 1990 21:01 | 101 |
| THE CURRENT SET OF MCC LICENSES ARE DUE TO EXPIRE ON MAY 30, 1990.
PLEASE FIND BELOW A NEW SET OF DCL COMMANDS TO LOAD AND REGISTER
THE NEW SET OF LICENSES THAT EXTEND THROUGH THE END OF JULY,
WHICH CAN BE USED WHEN THE CURRENT LICENSES EXPIRE. PLEASE DO NOT
USE THESE LICENSES UNTIL THE CURRENT LICENSES EXPIRE. MORE
INFORMATION WILL BE FORTHCOMING. THIS MEMO IS SIMPLY EARLY,
PRELIMINARY INFORMATION.
PLEASE NOTE, THAT TO LOAD AND REGISTER THESE LICENSES, ONE MUST
ENSURE THAT THE CURRENT LICENSES HAVE BEEN DISABLED AND UNLOADED.
PLEASE FIND BELOW A SET OF DCL COMMANDS TO DISABLE AND UNLOAD
LICENSES THAT HAVE BEEN USED IN THE PAST. IF THERE ARE ADDITIONAL
LICENSES IN EXISTENCE, THE COMMANDS CAN BE USED AS AN EXAMPLE AS
TO HOW TO DISABLE AND UNLOAD THOSE LICENSES NOT LISTED.
$ LICENSE DISABLE "DECMCC/EXEC" /AUTHORIZATION=SQM007487
$ LICENSE DISABLE "DECMCC/EXEC" /AUTHORIZATION=SQM008527
$ LICENSE DISABLE "DECMCC/TOOLS" /AUTHORIZATION=SQM007485
$ LICENSE DISABLE "DECMCC/TOOLS" /AUTHORIZATION=SQM008526
$ LICENSE DISABLE "DECMCC-DIRECTOR" /AUTHORIZATION=SQM009286
$ LICENSE DISABLE "DECMCC-FDA" /AUTHORIZATION=SQM009287
$ LICENSE DISABLE "DECMCC-LANMGR" /AUTHORIZATION=SQM009285
$ LICENSE DISABLE "DECMCC-NCL" /AUTHORIZATION=SQM009284
$ LICENSE DISABLE "DECMCC-SNMP" /AUTHORIZATION=SQM009288
$ LICENSE DISABLE "DECMCC-TOOLS" /AUTHORIZATION=SQM009289
$ LICENSE UNLOAD "DECMCC/EXEC"
$ LICENSE UNLOAD "DECMCC/TOOLS"
$ LICENSE UNLOAD "DECMCC-DIRECTOR"
$ LICENSE UNLOAD "DECMCC-FDA"
$ LICENSE UNLOAD "DECMCC-LANMGR"
$ LICENSE UNLOAD "DECMCC-NCL"
$ LICENSE UNLOAD "DECMCC-SNMP"
$ LICENSE UNLOAD "DECMCC-TOOLS"
$!
$! COMMANDS TO LOAD LICENSES THAT EXTEND THROUGH 31-JUL-1990
$!
$ ON ERROR THEN $ CONTINUE
$ SET NOON
$ LICENSE REGISTER "DECMCC-NCL" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM010931 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="31-JUL-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-CHND-OEBD-OPHE-HELP
$ LICENSE LOAD DECMCC-NCL
$ LICENSE REGISTER "DECMCC-LANMGR" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM010932 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="31-JUL-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-AHMA-GHDJ-GGPC-HKGA
$ LICENSE LOAD DECMCC-LANMGR
$ LICENSE REGISTER "DECMCC-DIRECTOR" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM010933 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="31-JUL-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-BFEL-GGFL-HNBG-KCAH
$ LICENSE LOAD DECMCC-DIRECTOR
$ LICENSE REGISTER "DECMCC-FDA" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM010934 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="31-JUL-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-JFNB-HLAB-INFJ-IKNJ
$ LICENSE LOAD DECMCC-FDA
$ LICENSE REGISTER "DECMCC-SNMP" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM010935 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="31-JUL-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-GBKO-JPBN-HJGE-IPME
$ LICENSE LOAD DECMCC-SNMP
$ LICENSE REGISTER "DECMCC-TOOLS" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM010936 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="31-JUL-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-NLIH-PKOC-PBGA-PGAG
$ LICENSE LOAD DECMCC-TOOLS
|
| 47.4 | EFT UPDATE LICENSES | TOOK::WONG | | Thu Jul 05 1990 03:07 | 98 |
|
PLEASE FIND BELOW A NEW SET OF DCL COMMANDS TO LOAD AND REGISTER
THE SET OF LICENSES FOR THE EFT UPDATE THAT EXTEND THROUGH THE END
OF OCTOBER. THESE LICENSES SHOULD ONLY BE USED WHEN THE EFT UPDATE
IS INSTALLED, NOT BEFORE.
PLEASE FIND BELOW A SET OF DCL COMMANDS TO DISABLE AND UNLOAD
LICENSES THAT HAVE BEEN USED IN THE PAST. IF THERE ARE ADDITIONAL
LICENSES IN EXISTENCE, THE COMMANDS CAN BE USED AS AN EXAMPLE AS
TO HOW TO DISABLE AND UNLOAD THOSE LICENSES NOT LISTED.
$ ON ERROR THEN $ CONTINUE
$ SET NOON
$ LICENSE DISABLE "DECMCC/EXEC" /AUTHORIZATION=SQM007487
$ LICENSE DISABLE "DECMCC/EXEC" /AUTHORIZATION=SQM008527
$ LICENSE DISABLE "DECMCC/TOOLS" /AUTHORIZATION=SQM007485
$ LICENSE DISABLE "DECMCC/TOOLS" /AUTHORIZATION=SQM008526
$ LICENSE DISABLE "DECMCC-DIRECTOR" /AUTHORIZATION=SQM009286
$ LICENSE DISABLE "DECMCC-FDA" /AUTHORIZATION=SQM009287
$ LICENSE DISABLE "DECMCC-LANMGR" /AUTHORIZATION=SQM009285
$ LICENSE DISABLE "DECMCC-NCL" /AUTHORIZATION=SQM009284
$ LICENSE DISABLE "DECMCC-SNMP" /AUTHORIZATION=SQM009288
$ LICENSE DISABLE "DECMCC-TOOLS" /AUTHORIZATION=SQM009289
$ LICENSE DISABLE "DECMCC-NCL" /AUTHORIZATION=SQM010931
$ LICENSE DISABLE "DECMCC-LANMGR" /AUTHORIZATION=SQM010932
$ LICENSE DISABLE "DECMCC-DIRECTOR" /AUTHORIZATION=SQM010933
$ LICENSE DISABLE "DECMCC-FDA" /AUTHORIZATION=SQM010934
$ LICENSE DISABLE "DECMCC-SNMP" /AUTHORIZATION=SQM010935
$ LICENSE DISABLE "DECMCC-TOOLS" /AUTHORIZATION=SQM010936
$ LICENSE UNLOAD "DECMCC/EXEC"
$ LICENSE UNLOAD "DECMCC/TOOLS"
$ LICENSE UNLOAD "DECMCC-DIRECTOR"
$ LICENSE UNLOAD "DECMCC-FDA"
$ LICENSE UNLOAD "DECMCC-LANMGR"
$ LICENSE UNLOAD "DECMCC-NCL"
$ LICENSE UNLOAD "DECMCC-SNMP"
$ LICENSE UNLOAD "DECMCC-TOOLS"
$ LICENSE REGISTER "DECMCC-DIRECTOR" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM011015 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="31-OCT-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-KHEA-MFBH-NMNN-KACA
$ LICENSE LOAD DECMCC-DIRECTOR
$ LICENSE REGISTER "DECMCC-LANMGR" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM011020 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="31-OCT-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-AIMP-DHOD-NNNM-IMNG
$ LICENSE LOAD DECMCC-LANMGR
$ LICENSE REGISTER "DECMCC-BMS" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM011016 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="31-OCT-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-BOHD-GLKB-PFJI-APKA
$ LICENSE LOAD DECMCC-BMS
$ LICENSE REGISTER "DECMCC-DEV-TK" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM011017 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="31-OCT-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-JPEK-IPOO-IACC-MFII
$ LICENSE LOAD DECMCC-DEV-TK
$ LICENSE REGISTER "DECMCC-DECNET-DIAGNOSIS" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM011018 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="30-NOV-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-OHEA-NIGE-JAOL-BFDM
$ LICENSE LOAD DECMCC-DECNET-DIAGNOSIS
$ LICENSE REGISTER "DECMCC-TCP-IP" -
/ISSUER="DEC" -
/AUTHORIZATION=SQM011019 -
/PRODUCER=DEC -
/UNITS=0 -
/TERMINATION="30-NOV-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-OIGH-MBBM-MOED-JBDJ
$ LICENSE LOAD DECMCC-TCP-IP
|
| 47.5 | License Expiration Problem! | WLW::ZIGLER | Tom Zigler, DTN 432-7541 | Tue Oct 30 1990 23:14 | 4 |
| My licenses have expired for DECmcc BMS and DECmcc DIR ... please post
license paks so that we can keep running at our field test site!
\Thanks in Advance
|
| 47.6 | | CCIIS1::ROGGEBAND | | Wed Oct 31 1990 06:22 | 6 |
| Tom,
I picked up some new PAKS on VTX this morning. I haven't applied them
yet but they should work on FT versions ?
Philippe.
|
| 47.7 | Applied Field Test PAK | TAZBOY::ZIGLER | Tom Zigler, DTN 432-7541 | Wed Oct 31 1990 20:06 | 6 |
| Since I just finished the install of the DECmcc BMS V1.0 SSB kit at the
customer field test site, I shall use the MCC$PAKS.COM license provided
for DECmcc-BMS. However, this license is due to expire November 30th;
therefore, I shall have to take action once again at this time.
\Thanks in Advance
|
| 47.8 | | NSSG::R_SPENCE | Nets don't fail me now... | Thu Nov 01 1990 13:40 | 5 |
| But gee, if this is the released product installed at a customer site
shouldn't they be using a REAL license and not the Internal PAKs?
s/rob
|
| 47.9 | try VTX supplied licenses | GOSTE::CALLANDER | | Tue Nov 20 1990 16:29 | 4 |
| real licenses should be available on VTX, if not send mail to
took::p_savage and request additional information.
|
| 47.10 | Pak to extend the V1.1 IFT and demo software | KEEL::SAVAGE | Peter Savage | Wed Nov 28 1990 16:16 | 18 |
|
This PAK will allow the IFT software and MCC DEMO to continue to run
until the end of 1990. No further PAKS will be generested for the
V1.1 IFT software. With V1.1 EFT the DECMCC-BMS PAK replaces the
BMS2 PAK.
$ LICENSE REGISTER "DECMCC-BMS2" -
/ISSUER="DEC" -
/PRODUCER=DEC -
/AUTHORIZATION=SQM020939 -
/UNITS=0 -
/TERMINATION="31-DEC-1990" -
/VERSION=1.0 -
/AVAILABILITY=F -
/CHECKSUM=1-EOCH-BJKM-OFLO-BGJE
$ LICENSE LOAD "DECMCC-BMS2"
|
| 47.11 | tcpip pak | HGOVC::LILLIANTANG | | Mon Dec 03 1990 02:29 | 3 |
| License for tcpip am listed in note 386 expired on Nov 30, 90. is
there a new pak available? thanks.
Lillian
|
| 47.12 | Best bet - check with VTX | WAKEME::ROBERTS | Keith Roberts - DECmcc Alarms Team | Mon Dec 03 1990 12:40 | 4 |
| I just picked up license from VTX ... the only one I couldn't find
was the DECMCC-BMS2 license (but, you can get that from 47.11)
/keith
|
| 47.13 | V1.1 IFT PAK Urgently needed | LISVAX::ANDRE | | Fri Jan 18 1991 15:50 | 11 |
| 47.14 | TCP/IP AM PAK? | HGOVC::SUSANCHAN | | Fri Jun 28 1991 02:40 | 5 |
|
Where is the latest TCP/IP AM PAK? My is terminated on 31-May-1991.
Thanks,
Susan Chan
|
| 47.15 | VTX | BIKINI::KRAUSE | Robert, TSSC-NaC @MUH | Wed Jul 10 1991 05:28 | 5 |
| > Where is the latest TCP/IP AM PAK? My is terminated on 31-May-1991.
It is available via VTX.
*Robert
|