[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference iosg::all-in-1_v30

Title:	OLD ALL-IN-1 (tm) Support Conference
Notice:	Closed - See Note 4331.l to move to IOSG::ALL-IN-1
Moderator:	IOSG::PYE

Created:	Thu Jan 30 1992
Last Modified:	Tue Jan 23 1996
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4343
Total number of notes:	18308

3612.0. "Is SIXEL official ..." by TAV02::CHAIM (Semper ubi Sub ubi .....) Wed Dec 01 1993 13:34

A customer has asked whether the Read functions including the ability to scroll
will work for a SIXEL file.

If the answer is positive, is this officially supported, and if so where is it
documented.

Thanks,

Cb.

T.R	Title	User	Personal Name	Date	Lines
3612.1	SIXEL is supported	IOSG::NEWLAND	Richard Newland, IOSG, REO2-G/L2	`Wed Dec 01 1993 21:36`	32
	SIXEL (and REGIS) is supported by the LIST function, assuming you are using ALL-IN-1 from a terminal which supports these protocols. The SIXEL or REGIS region is displayed between picture markers, i.e. -------------- PICTURE ----------------- The text before and after the picture is not displayed on the screen at the same time. This is because a SIXEL or REGIS graphic often requires a full screen to dispay correctly. Therefore as you scroll through the file the following is displayed on the screen: [1] Text Text -------------- PICTURE ----------------- [2] The SIXEL graphic [3] -------------- PICTURE ----------------- Text Text Richard
3612.2	What about SIXEL as att and DDIF ??	TAV02::CHAIM	Semper ubi Sub ubi .....	`Thu Dec 02 1993 09:53`	10
	Now that I know that SIXEL support basically exists, is it possible to attach a SIXEL file to a document, or is it only supportd within a WPS-PUS document within a specified control block. Also, what about a DDIF document. COuld this be attached to a WPS-PLUS document? Thanks, Cb.
3612.3	Yes and Yes	IOSG::NEWLAND	Richard Newland, IOSG, REO2-G/L2	`Thu Dec 02 1993 22:49`	14
	>Now that I know that SIXEL support basically exists, is it possible to attach a >SIXEL file to a document, or is it only supportd within a WPS-PUS document >within a specified control block. Your SIXEL file should be brought into ALL-IN-1 as an ASCII document. >Also, what about a DDIF document. COuld this be attached to a WPS-PLUS >document? Yes. Richard