| Title: | *OLD* ALL-IN-1 (tm) Support Conference |
| Notice: | Closed - See Note 4331.l to move to IOSG::ALL-IN-1 |
| Moderator: | IOSG::PYE |
| Created: | Thu Jan 30 1992 |
| Last Modified: | Tue Jan 23 1996 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4343 |
| Total number of notes: | 18308 |
ALL-IN-1 2.4, VMS 5.5
i have a customer site that is using STAR NX 1000 printers. they
print to the PORT destination. they are seeing some unusual behavior...
- printing stops 1/2 thru documnt
- skips words and/or lines
- prints out garbage characters
has anyone ever used these printers before? the users have packard
bell 286 PB686 pc's.
the site printer record for PORT has:
Format Printer Type: LP11
Destination Printer Type: PORT
the printer type record for PORT has:
Foreground function: DO WPPPORT
Background function:
Printer Device: LP11
Print Form:
i've had them try using PORT LA50 and PORT LA75, the printing seems to
get further, but the messages are triple spaced.
thanks for listening! -ann
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3026.1 | FREE::WPS_PLUS? | AIMTEC::WICKS_A | U.S.A 2 England 0 - I was there! | Tue Jul 20 1993 02:09 | 1 |
| 3026.2 | Flow control? | IOSG::NEWLAND | Richard Newland, IOSG, REO2-G/L2 | Tue Jul 20 1993 02:31 | 5 |
It looks like data is being sent to the printer faster than it can handle it. Is flow control enabled on the printer port and/or the printer? Richard | |||||
| 3026.3 | ANGLIN::HARRISA | beep me | Tue Jul 20 1993 02:40 | 10 | |
i got a "technical support" number for this company and the people
there did not know about ALL-IN-1! they said the printer emulates an
EPSON LX800.
re .1 - i'll cross post my note there
re .2 - how do i enable flow control on the printer port?
ann
| |||||
| 3026.4 | Flow control | IOSG::NEWLAND | Richard Newland, IOSG, REO2-G/L2 | Tue Jul 20 1993 14:21 | 9 |
Flow control has to be enabled on the printer port and in the printer. The methods for setting flow control are specific to the PC and its terminal emulation software and the STAR NX 1000. You could also try sending the data to the printer at a slower baud rate. Richard | |||||