| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 232.1 | | POBOXB::BAK | | Mon Sep 09 1996 16:15 | 4 |
| 232.2 | Will Check | ACISS2::SDATZMAN | | Wed Sep 11 1996 03:01 | 6 |
| 232.3 | Use P00>>show config to find CPU revs | POBOXB::STEINMAN | | Wed Sep 11 1996 20:14 | 8 |
| 232.4 | NT 4.0 qual pending on 5/300 | DECWET::BUCHMAN | | Wed Sep 11 1996 23:12 | 12 |
| 232.5 | | ACISS2::SDATZMAN | | Thu Sep 12 1996 01:08 | 17 |
| 232.6 | Good Data and Advice | ACISS2::SDATZMAN | | Thu Sep 12 1996 01:14 | 13 |
| 232.7 | Another thing to check... | STEVMS::BOWSE | | Thu Sep 12 1996 16:58 | 5 |
| 232.8 | Rev 0000 and Rev 0004 | ACISS2::SDATZMAN | | Mon Sep 16 1996 13:03 | 12 |
| 232.9 | | LANDO::CUMMINS | | Mon Sep 16 1996 14:15 | 3 |
| 232.10 | | ACISS2::SDATZMAN | | Mon Sep 16 1996 15:05 | 4 |
| 232.11 | 4.0 not yet supported on cached CPUs | MOVMON::DAVIS | | Thu Dec 05 1996 13:40 | 8 |
| 232.12 | NT 4.0 not yet supported | MOVMON::DAVIS | | Wed Dec 11 1996 13:35 | 56 |
| 232.13 | what about AS 4000? | TROOA::MSCHNEIDER | Nothing witty to say | Fri Dec 13 1996 01:53 | 1 |
| 232.14 | AS4000 + 2 CPU slots + 4 memory slots = AS4100 | MOVMON::DAVIS | | Fri Dec 13 1996 12:48 | 4 |
| 232.15 | | KDX200::COOPER | There is no TRY - DO or DO NOT! | Fri Feb 21 1997 19:54 | 7 |
| Has this been resolved?
I'm expecting an implementation of 4000's at a customer site in the
VERY near future (like, next week :-).
update??
|
| 232.16 | fix on MS web, see note 394 for details | CERN::HOBBS | Congrats to the Ignoble Peace Prize winner! (http://www.eecs.harvard.edu/ig_nobel) | Sat Feb 22 1997 07:37 | 0 |
| 232.17 | B3001_CA rev info reqd 4 NT4.0 | KAOFS::D_HODGSON | | Fri May 23 1997 18:38 | 11 |
| Previously noted cached CPUs must be at HW rev 4 to run WNT server 4.0.
Received a 4100 with 4 CPUs B3001-CA uncached with a mix of HW revs of
0 and 1 and WNT server 4.0 preloaded from a sales partner. Does this
CPU module also need to be at rev 4? Is there an FCO? Is this an
issue for the sales partner?
Reply required asap.
Thanks dh
|
| 232.18 | | PROXY::ALFORD | | Tue May 27 1997 12:43 | 12 |
| For the B3001-CA (uncached cpus) the min rev is D01. This was the first
FRS rev...and only a few should be in the field. A rev D02 is the
lastest rev. If you do a "show config" at the console prompt, a rev D01
will show up as a 0 and D02 as a 1. To make sure you have a min rev D01,
you could pull the cpu that shows up as a rev 0 in the "Show config"
command and double check. The SROMs are the same between these revs.
The previous notes were referring to a min rev D04 for the B3002-AB (cached
cpus).
/bruce
|