| Title: | HSJ30/40 Product Conference |
| Moderator: | SSDEVO::EDMONDS |
| Created: | Tue Jul 13 1993 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1264 |
| Total number of notes: | 4958 |
We have a dual redundant HSJ40 port 0 connected to two TSZ07s and port
1 directly connected to a single TSZ07 - no BAXXX or DWZZA. These
HSJs report "bad fan or power supply" on shelves 1 and 2. Of course we
don't have a shelf 1 or 2 since the TSZs are directly connected.
Is there a fix for this or is this supposed to be taken care of by the
SCSI cable - i.e. is a 17-03831-01 absolutely needed?
Second question, do the TSZ07s need to be set up in 2s compliment mode
to work properly with an HSJ40?
VMS 6.2 HSJ V2.7-1
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1221.1 | Yes & Yes | KERNEL::LOANE | Comfortably numb!! | Wed Mar 19 1997 17:48 | 10 |
>i.e. is a 17-03831-01 absolutely needed?
Yup; you have connected a device with regular SCSI pinouts to a
StorageWorks SCSI Interface and have grounded the SHELF OK and SWAP
L signals; use the little cable and a BN21H
> Second question, do the TSZ07s need to be set up in 2s compliment mode
> to work properly with an HSJ40?
Yup
| |||||