| Title: | GIGAswitch |
| Notice: | GIGAswitch/FDDI Jan 97 BL3.1 914.0 documentation 412.1 ion 412.1 |
| Moderator: | NPSS::MDLYONS |
| Created: | Wed Jul 29 1992 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 995 |
| Total number of notes: | 4519 |
Hi, I'm not very familiar with ATM and therefore probably overseeing something... Customer has two GS/FDDI which he wants to connect by means of AGL2's over a SONET network. The SONET network consists of two muxes which in turn are connected to each other by means of a 622 Mbps trunk. The only setup on the AGL card at this moment is: set the PHY to SONET instead of SDH. However, customer does not see any communication accross the ATM link. Any suggestions where to look and/or what else should be configured? Ton. [Posted by WWW Notes gateway]
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 968.1 | NPSS::MDLYONS | Michael D. Lyons DTN 226-6943 | Mon Apr 14 1997 15:16 | 5 | |
...look in the AGL Reference Guide which is located at the www
pages. It has a chapter on how to properly set things up. The
appendices also contain useful information.
MDL
| |||||
| 968.2 | NPSS::MDLYONS | Michael D. Lyons DTN 226-6943 | Mon Apr 14 1997 15:16 | 1 | |
...I suspect the timing is not set up properly. | |||||
| 968.3 | A succesfull SDH-Connection | ZUR01::FIERZ | Tue Apr 22 1997 07:58 | 10 | |
We just setup a connection of 2 GS/FDDI via AGL-2+ ports and a SDH-Mux.
The requried MIB were: aglInterfaceSonetMode (2) = SDH- Mode
aglInterfaceSonetTiming (2) = local timing
You migth have to try either loop or local timing, depending on the
ability of the used Sonet-Mux to provide the clock or not.
(The Mux must provide a 155Mbps port for the AGL)
Thomas
| |||||