| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 5163.1 | | DECWET::LEESC | | Tue Oct 01 1996 13:32 | 10 |
| 5163.2 | Does the EEPROM hang problem look like this? | NNTPD::"moore@stl.dec.com" | Adrian Moore | Sun Apr 20 1997 22:13 | 19 |
| When installing Windows NT Server v4.0 build 1381 on an AlphaServer 2100a with
FirmWare 4.50, the system would repeatedly hand on
"Setup is preparing to initialize the Windows NT networking installation".
This was worked around (eventually ;] ) by installing a fresh copy of v3.51
by pulling the current v3.51 HAL, and then upgrading.
After the error message, NVRAM was cleared and defaults had to be set up and
ECU 1.9 run (sometimes unsuccessfully) before proceeding.
Does this sound like the problem due to an EEPROM you were investigating at
the end of 1996? (per -.1)
Thanks & Regards,
Adrian Moore
Sydney CSC.
[Posted by WWW Notes gateway]
|
| 5163.3 | | DECWET::LEESC | | Mon Apr 21 1997 12:50 | 6 |
| It might be. Did you use the NT V4.0 HAL that was posted on the web or did
you use the HAL that was on the CD? For NT V4.0, you need to use the HAL
that is posted on the web at http://www.windows.digital.com/support/sysoft.asp.
Scott
|
| 5163.4 | Yes - hal of www.windows.digital.com | NNTPD::"moore@stl.dec.com" | Adrian Moore | Wed Apr 23 1997 21:18 | 10 |
| Hi,
Yes the hal was the latest external one.
Did you have more info on the EEPROM issue? (a fix?)
Thanks & regards,
Adrian Moore
[Posted by WWW Notes gateway]
|
| 5163.5 | | DECWET::LEESC | | Thu Apr 24 1997 13:11 | 4 |
| The HAL that is posted on the web fixes the EEPROM problem.
Scott
|
| 5163.6 | Thanks for the info | NNTPD::"moore@stl.dec.com" | Adrian Moore | Sun Apr 27 1997 18:39 | 8 |
| Hi Scott,
Thanks for the clarification.
Thanks & regards,
Adrian Moore
Sydney CSC
[Posted by WWW Notes gateway]
|