| Title: | Server_works |
| Moderator: | PCBUOA::IS_SYSTEM |
| Created: | Fri Jun 30 1995 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 291 |
| Total number of notes: | 1063 |
Hi,
We want to use version 1.1 of the RSM card ,we installed the software
without any problem .When we start the program it detect automatic that
he must do a upgrade from version 3.18 to version 3.44 every thing is
working till 99% of the download then it stops ??
Had anyone had this problem and find a solution.
Best regards
Yves
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 234.1 | solution | BIS6::VENNEMAN | Tue Mar 25 1997 14:10 | 3 | |
Solution find :
Use a direct cable as in the book
| |||||
| 234.2 | Always make sure your flow control works | PCBUOA::BRACKEN | Tue Mar 25 1997 14:19 | 9 | |
You don't necessarily need a direct cable but you do need to have
flow-control working properly over your modem connection. This may be
easier to do at the outset with a null modem cable.
There are many notes on this subject. Check through all notes files on
RSM since many cover this subject.
99% just means the pipe and buffers have filled on the management
station but the card could be waiting on a flow-control signal to
continue reprogramming itself. Don't shut off the power to the board
until you have succesfully downloaded.
| |||||