Conference pcbuoa::server_works

	On the NT Server you'll need the NT SNMP agent already installed
	before you install the GAM Agent. Check the 
	HKEY_LOCAL_MACHINE\
		System\
		Currentversion\
		Services\
		SNMP\
		Parameters\
		ExtensionAgents\
		
		There should be a value like
		MLX_GAM:REG_SZ:SOFTWARE\Mylex\GAM\CurrentVersion\

	Then in you UniCenter environment you should enroll the MIB
	file and associate it with the system that has the Mylex installed.
	(Or if it is an ServerWorks running system, associate it with
	 Server.DEC)
	Then in their Trap configurator point to the system and you should
	see several traps around the Mylex and its features like
	LogicalDriveRebuild etc. Just tell it to sent these to your 	
	machine.

	Pjotrr

    I don't know Unicenter TNG but if you are using server works make sure
    that you also perform the NT SNMP Service Configuration for traps.
    Filling in all trap destinations.
    
    As far as Server Works Manager 3.0 is concerned. The current build
    needs to make another pass on translation on Internationalization
    before we review it again and it is slated to start qualification
    testing before we can even think of Beta.
    
    Yo estube revisando el castellano despues del primero paso y encontre
    algunas diferencias entre los terminos technicos y traduccion puro.
    
    As far as SDK is concerned, there is none in Server Works.
    I think you may be referring to the 3rd Party Integration?
    If so, there is some documentation and examples on the share
      \\jules\public \sw3pty that applies to Server Works 2.2.
    However, this will be changed dramatically in Server Works 3.0.
    Please, send me a mail and I'll get you the info on Server Works 3.0.
    
    Saludos a todos los ex-Philips que siguen trbajando en bancaria.
    
    Rich
        

	Thank you very much for your answers.

	I've tested all you say in .1 and is ok but I continue having a 
problem with gam events via SNMP: Unicenter TNG seems to don't receive any 
traps. 
	I've also compiled the gam MIB in Unicenter and we (myself and a 
person of CA) are trying to conect to this mib via Unicenter and doesn't 
respond to any query to any variable in the MIB.

	I've reviwed the INI file for the GAM events and I've a doubt in te 
line:
	gamevent -s 7 -p 158 -h "host address"
	
	What's the meaning of -s and -p ?

	Is -p the port number for traps ?

	If is the port number I think that must be 162 that is the default 
port for traps.

	What is your opinion about this ?

	Thank you andbes regards.

	Alfonso Vara
	OMS Spain