[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference pcbuoa::server_works

Title:Server_works
Moderator:PCBUOA::IS_SYSTEM
Created:Fri Jun 30 1995
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:291
Total number of notes:1063

216.0. "RSM Direct Connection Problem" by ROMTSS::MATTACCHIONE () Tue Feb 25 1997 07:53

Hi,

I need to realize for demo a direct connection from a RSM card
and a WNT server machine.

I have the connection 25pin(RSM) 9pin(Wnt)

I have followed the instruction on page 130 of RSM user manual:

9Pin			25pin

3 ----------------------3
2 ----------------------2
7 ----------------------5
8 ----------------------4
5 ----------------------7
1 ----------------------20
4 ----------------------8


Then I have modified the RS_PM.INI as follow:

[Ports]
com1:dl:nt1ced

Then I have set the com1 as follow:

Baud rate 38400 , Data bits 8 ,Parity none , stop Bits 1 ,Flow control HW ,
FIFO enabled.

The in the NT1CED I have imserted only the Server Names and attribute
but no connection actions.

When I attempt to connect via Rsm server manager I obtain the following
indications in the Connection Status Box.

Initiating connection via serial port/modem.
Starting connection process on port com1
connection attempt failed. Connection with remote server failed.


Any idea about?

Thanks Gabriele
T.RTitleUserPersonal
Name
DateLines
216.1Just an "=" missingPCBUOA::BRACKENTue Feb 25 1997 11:458
    I don't know about the cable but the rs_pm.ini entry should be
        com1=:dl:nt1ced
    The l produces the com1lm.lml log which you should send to me if it
    still doesn't work. It may have some clues.
    
    Thanks,
    
    Rich
216.2lml file sentROMTSS::MATTACCHIONETue Feb 25 1997 12:0810
>   I don't know about the cable but the rs_pm.ini entry should be
>    com1=:dl:nt1ced
    
Sorry I have a mistake to write the .0 info.
In the rs_pm.ini effective string is com1=dl:nt1ced

I have send you the lml file.

Thanks 
Gabriele