| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 3.1 | pre-release, pre-EFT, use at own risk | OZROCK::RODRIGUES | Can I go home, now? | Tue Oct 13 1992 14:23 | 54 |
| 3.2 | MIPS pre-EFT kit | OZROCK::RODRIGUES | Can I go home, now? | Wed Oct 14 1992 02:02 | 133 |
| 3.3 | EFT AXP Kit Available | OZROCK::RODRIGUES | Can I go home, now? | Thu Nov 19 1992 00:35 | 83 |
| 3.4 | Documentation OK | OZROCK::RODRIGUES | Can I go home, now? | Thu Nov 19 1992 12:19 | 11 |
| 3.5 | EFT Update AXP Kit available | OZROCK::RODRIGUES | Just call me minor botheration | Fri Dec 18 1992 15:05 | 121 |
| 3.6 | SSB Kit | OZROCK::RODRIGUES | Vini. Vidi. Conjugati ! | Mon Mar 08 1993 13:31 | 112 |
| 3.7 | X.25 V1.0A for OSF/1 pre-SSB kit available | OZROCK::HUNT | Netswimming deserves a quiet Net. | Wed Feb 23 1994 21:29 | 55 |
| 3.8 | X.25 V1.0A for OSF/1 SSB kit available | OZROCK::HUNT | Netswimming deserves a quiet Net. | Mon Mar 07 1994 21:11 | 95 |
| 3.9 | V1.1 pre-EFT kit | WRUMPI::mccane | The guy in the yellow shirt | Wed Aug 03 1994 14:41 | 25 |
| 3.10 | X.25 V1.1 FT kit | OZROCK::MCCANE | The guy in the yellow shirt | Thu Oct 06 1994 13:11 | 16 |
| 3.11 | X.25 V1.1 available | WRUMPI::mccane | The guy in the yellow shirt | Fri Nov 18 1994 16:37 | 14 |
| 3.12 | X.25 V1.2 Available | OZROCK::MUGGERIDGE | X.25 is 1-2-3 | Mon Mar 13 1995 16:18 | 30 |
| 3.13 | X.25 V1.2A Available | OZROCK::MUGGERIDGE | X.25 is 1-2-3 | Wed Jun 28 1995 22:12 | 102 |
| 3.14 | X.25 V1.3 Available | OZROCK::MUGGERIDGE | X.25 is 1-2-3 | Tue Sep 19 1995 16:23 | 24 |
| 3.15 | X.25 T2.0 - N | OZROCK::MUGGERIDGE | X.25 is 1-2-3 | Mon Oct 23 1995 22:29 | 60 |
| 3.16 | X.25 T2.0-2 is now available | OZROCK::HUNT | Excuse me sir, is that halibut registered? | Tue Nov 21 1995 00:27 | 47 |
| 3.17 | WAN Support V2.0 (formerly X.25 V2.0) is available | OZROCK::MUGGERIDGE | X.25 is 1-2-3 | Wed Dec 20 1995 20:23 | 24 |
| 3.18 | WAN Support T3.0-2, EFT kit for platinum is available | OZROCK::FERRIER | Franklin Ferrier, Net&Comms Engineering-Australia (GMT +10) | Tue Apr 23 1996 13:49 | 21 |
| 3.19 | Correction to kit locations. Please use oils:: | OZROCK::FERRIER | Franklin Ferrier, Net&Comms Engineering-Australia (GMT +10) | Tue May 14 1996 16:52 | 5 |
| 3.20 | WAN Support V2.0a for Digital UNIX is available | OZROCK::MUGGERIDGE | X.25 is 1-2-3 | Thu Oct 17 1996 12:30 | 32 |
| 3.21 | WAN Support T3.0-4 for Digital UNIX (EFT kit) | OZROCK::MUGGERIDGE | X.25 is 1-2-3 | Tue Apr 01 1997 07:02 | 96 |
| An EFT update kit is now available for:
WAN Support T3.0-4 for Digital UNIX
It is accessible via anonymous FTP at:
netrix.lkg.dec.com:/kits/osf1/WAN_T3.0-4/WAN_T3.0-4.tar
The cover note is attached below.
Best regards,
Matt.
WAN Support for Digital UNIX Systems
March, 1997
COVER LETTER
Operating System: Digital UNIX, V4.0x
Software Version: T3.0-4
IMPORTANT NOTE ON INSTALLATION - YOU MUST REBOOT
------------------------------------------------
To install WAN Support T3.0-4, you must first completely remove the
previous version of the kit, and *most* importantly, you must then
reboot your system. This procedure will remove all the installed
files as well as clear the running kernel of older subsystems.
To completely remove the old version of the kit, you may use the
following procedure:
1. Determine the subsets installed which pertain to the X.25 kit.
2. Issue setld -d <subset ...>
3. Reboot
4. Install WAN Support T3.0-4
REMOVING OLD SUBSETS
--------------------
For power users, the following command line will remove all subsets
pertaining to X.25. Be careful, that if you don't wish to remove any
DECnet subsets, then you should remove the string "^DNA|" from the
line below.
# setld -d `setld -i | grep installed |
awk '/^DNA|^CTA|^ISD|^WDA|^XXA|^ZZA/ {printf ("%s ", $1)}'`
NOTE: This command is issued on one line. It is split here for convenience.
To verify all desired subsets have been removed, you should review the
list by issuing:
# setld -i | grep installed
NOW REBOOT YOUR SYSTEM
INSTALLING WAN Support T3.0-4
-----------------------------
Please follow this procedure:
1. Extract the kit from the tar file
2. Set the current directory to the location where the kit has
been unpacked, or you may use RIS.
3. Install the kit, using 'setld -l'
A typescript of the installation is attached to the cover letter shipped
with the kit. The list of subsets which are presented for installation
may be different on various systems. This typescript was take from an
installation on a DEC3000 machine.
DOCUMENTATION
=============
WAN Support T3.0-4 is a port of the WAN Support V2.0a product. The
significant change in this release is the support of dynamically
loadable subsystems. Therefore the documentation from the V2.0a kit
is still applicable to this release. You can obtain the V2.0a
documentation from the distribution CD.
|
| 3.22 | WAN Support V3.0 for Digital UNIX | DELNI::MUGGERIDGE | | Thu May 15 1997 05:47 | 18 |
| Networks Engineering is pleased to announce the SSB kit for WAN
Support V3.0 for Digital UNIX. This kit supports Digital UNIX V4.0.
The kit may be copied from:
DECnet:
netrix::/kits/osf1/WAN_V3.0
Anonymous ftp:
netrix.lkg.dec.com:/kits/osf1/WAN_V3.0
For your convenience, tar files of the kit and documentation have been placed
in the top-level directory.
This release operates on V4.0 of the Digital UNIX operating system
only. For more details please see the Software Product Description
SPD 42.47.
|