Conference orarep::nomahs::repository

1091.0. "%CDD-E-ENDOFDIR, end of directory; CDD 6.1-02, DTR 7.1, RDB 6.0.16" by ataxp1.at.oracle.com::RROEHRIC (Oracle Austria) Fri May 16 1997 15:14

One of our customers has applied ECO2 to CDD 6.1.

After that he's a lot of troubles with DTR.

Yes, I know that DTR is a DEC-Product, but I only wants to check if this error
isn't forced from CDD6.1 ECO2.

>DEC DATATRIEVE V7.1
>Digital Query and Report System
>Type HELP for help
>DTR> show all
>Domains:
>        * ACC;1         * AH_STUELI;1   * APL_TEMP;1    * ARBPL;1       *
>AXI_IN;1      * BEDARF;1      * CHANGE_NOTE;1
>        * CHANGE_NOTE_SUM;1             * DATUM;1       * DISK_USAGE;1  *
>FILE;2        * FPLOK;3       * GATEWAY_TRACE;2
>        * GFPL;1        * HIST_BATCH_TMP;1              * INVENTAR;1    *
>KSP_AB;1      * KSP_DAT;1     * KSP_PLT;1
>        * LAN_CONFIG;1  * LAN_CONFIG_OLD;1              * LICENSE_DB;2  *
>LPCH_DIR;2    * MAG_ANA;1     * MAIL_PROFILE;3
>        * MAP_ARBPL;2   * MAT_SNR_FLAG;1                * MS_MAIL;1     *
>NEW_MQS;1     * NPL;2         * OESE_KALK;2
>        * OFB1;1        * PHILIPS_LIS;4 * PHILIPS_SUM;1 * PHILIPS_TEMP;1
>          * PHONE_BOOK;2
>        * PROCON_STANDARDPREIS_VIEW;1   * QUOTA;1       * RADLED;2      *
>RADLED_PUT;1  * SNR_PLOT;1    * SNR_REP;2
>        * SPACE;2       * STANDARDPREIS;1               * STATBEL;2     *
>STUNDENSATZ;1 * SWL;1         * SYSUAF_LIST;2
>%CDD-E-ENDOFDIR, end of directory


>AP2 > dic op
>Welcome to CDO V6.1
>The CDD/Repository V6.1 User Interface
>Type HELP for help
>CDO> dir/fu lan_config
>
> Directory CDD$COMMON:[CDDPLUS]BRU
>
>LAN_CONFIG(1)                                    DTR$DOMAIN
>Created:   7-MAY-1992 09:12:46.06        Revised:  7-MAY-1992 09:12:46.06
>Owner:  unknown
>Access Cntrl List:
>(IDENTIFIER=[OIC,BRUNNER],ACCESS=READ+WRITE+MODIFY+SHOW+CHANGE+DELETE+CONTROL
>)
>Size: unknown    dictionary_format: DMU format
>
>CDO> sho vers
>CDO V6.1
>CDD/Repository CDD V6.1
>dictionary CDD$COMMON:[CDDPLUS]CDD$DATABASE;1
>        Major Version 26
>        Minor Version 3
>CDO> show generic dtr$domain lan_config
>Definition of *** name is unspecified ***   (Type : DTR$DOMAIN)
>|   DTR$DOMAIN_TYPE                 1
>|   DTR$RECORD_PATHNAME             _CDD$TOP.BRU.LAN_CONFIG_REC
>|   DTR$FILE                        ESM$DAT:LAN$CONFIG.DAT
>
>
>CDO>  Exit

Any Hints, Suggestions ...

Thanks in Advance,

	Reinhold
 

    
    Hi Reinhold,
    
    I think you need to relink DTR after having applied the CDD ECO. Thus,
    do you still have problems after having executed
    SYS$COMMON:[DTR]DTRBLD.COM ?
    
    Hope this help.
    
    Patrick
    
    PS: is it VAX or AXP ? 
      
    

Hi Patrick,

        the customer wants to upgrade his environment to:

        RDB 7.0
        CDD 6.1
        DTR 7.1

In the installation-guide for RDB 7.0 it's posted that it's required to
install ECO2 for CDD 6.1.
The customer mentiones that there where no problems with cdd 6.1-00,RDB 6.1 and
DTR 7.1.
So the question is further, is it possible to use CDD 6.1-01 and RDB 7.0?
In the meantime the customer will try to rebuild DTR to check if the problem
still remains.

        Regards
                Reinhold