Conference orarep::nomahs::repository

1087.0. "Corrupted CDD System areas???" by ORAREP::TEKAPO::TOWN () Mon May 12 1997 21:44

On VAX VMS 6.1, CDD 5.3, I get the follownig errors.  Essentially I cannot 
automate the CDD build because of these problems.
At the end of the dictionary create, a VERIFY/ALL/REBUILD is required.

Thanks for your time


Pete.



The log from a dictionary create is...


$ cdo
Welcome to CDO V2.3
The CDD/Repository V5.3 User Interface
Type HELP for help
CDO> define DICTIONARY DISK$PS_DICT:[DICT] .
%CDD-I-CRECONT, define repository continuing without template
CDO> set def PS_DICT
CDO> define DIRECTORY database.
%CDO-E-ERRDEFINE, error defining object
-CDD-E-ERRCREDIR, an error occurred while creating the directory
-RDB-E-OPEN_TRANS, detach failed because 1 transaction are active
CDO> define DIRECTORY database.
%CDO-E-ERRDEFINE, error defining object
-CDD-F-ERRCREDIR, an error occurred while creating the directory
-LIB-F-BADBLOSIZ, bad block size
CDO> define DIRECTORY database.
CDO> define DIRECTORY database.records.
CDO> define DIRECTORY database.fields.
CDO> define DIRECTORY fields.
CDO> define DIRECTORY records.
CDO> define DIRECTORY tasks.
CDO> define DIRECTORY groups.
CDO> exit

$ cdo
Welcome to CDO V2.3
The CDD/Repository V5.3 User Interface
Type HELP for help
CDO> set def ps_dict
CDO> dir

 Directory DISK$PS_DICT:[DICT]

DATABASE                                         DIRECTORY
FIELDS                                           DIRECTORY
GROUPS                                           DIRECTORY
RECORDS                                          DIRECTORY
TASKS                                            DIRECTORY
CDO> @psg_database_fields.cdo
CDO> @psg_acms_fields.cdo
CDO> @psg_fields.cdo
CDO> @psg_database_records.cdo
CDO> @psg_acms_records.cdo
CDO> @psg_records.cdo
CDO>  Exit

$ cdo
Welcome to CDO V2.3
The CDD/Repository V5.3 User Interface
Type HELP for help
CDO> verify/all ps_dict
%CDD-W-VF_REBUILD, dictionary corrupt please run VERIFY/REBUILD
%CDO-E-ERRVERIFY, error verifying object
-CDD-E-ERRVERIFY, error verifying dictionary
-RDB-READ_ONLY_TRANS, attempt to update during a read-only transaction
%PROTOCOL, network protocol error
CDO> verify/all/rebuild ps_dict
are you satisified with the backup of your dictionary, proceed? [Y/N] (N)y
CDO>  Exit
                                                                                

I'd be tempted to install all OpenVMS patches for V6.1 there are many which
can affect the correct running of Rdb on OpenVMS V6.1 and V6.2

Ian

These problems only occured after the installation of the 19-March ECO patches
(marked '*').
All other system software seem s to be OK, and "luckily" our customer does not
use CDD.
I will be upgrading ACMS(4.1 - 4.2 if it is released) and DECforms(2.1B) in a 
couple of months time and a CDD upgrade(6.1-03) will also be required.

Current revision levels of software are:

    VAX/VMS                        6.1
        VAXBACK04_061
        VAXCOPY01_061
        VAXF11X03_061
        VAXLMF03_061
        VAXLOAD01_061
        VAXLOGI04_061
        VAXMAIL05_061
        VAXQMAN03_061
        VAXRMS02_061
        VAXSCSI03_061
        VAXSYS13_061
        VAXSYS14_061
        VAXSYS15_061
        VAXSYSL01_061

        VAXACRT09_061  *
        VAXRMS04_061   *

    DECnet OSI                 6.3-6  * [6.3-2]
    Rdb                        6.0-14
    CDD                        5.3-09
    UCX                        3.3-7
    Pathworks                  5.0-E  *  [5.0-D]

    ACMS                       3.3B
    ACMS desktop               2.2-1
    DECforms                   1.4-14  *  [1.4-5]
    CDA Converter Library      2.2
    DECwindows Motif           1.2-3
    VAX DQS                    1.3

    DEC C                      5.2
    DEC RALLY                  4.0-5
    DECSET                     12.0C
    DECwrite                   3.1
    VAX COBOL                  5.3