Conference oass::racers

              <<< GENRAL::DISK$OURDISK:[NOTES$LIBRARY]RV.NOTE;4 >>>
                               -< RV notesfile >-
================================================================================
Note 8.206                     FOR SALE and WANTED                    206 of 207
ASDS::LANGILLE                                       14 lines  12-SEP-1990 13:10
                             -< 1977 GMC 454 Sub. >-
--------------------------------------------------------------------------------
     FOR SALE
    
    1977 GMC 2500 3/4 TON
    2 WHEEL DRIVE
    454 V8 WITH 400 TRANS/COOLER
    TRAILER PACKAGE  4:10 REAR GEARS
    
    This needs minor work driven everyday,has high mileage.
    Price $1300.00 or B.O.
    
    Contact Brian langille
    DTN 276-8065   STOW
    Home 508-534-0569 or send mail to ASDS::langille
    

    
    	We have many, Many peices parts that MUST GO!  no set prices 
    everything is negotiable (MOSTLY CHEAP OR FREE!)
    Here is a small list!:
    
    	Almost all the parts are for 1970 to 1972 Chevelle, some are in
    great cond. some are fair, some are free!~
    
    :1972 Chevelle (whole car, 6 cyl- don't run )  : Deck lids
    : Engine hoods	:Front Bumbers  : Rear Bumbers : Door's
    : Door Skins	: Transmissions		: Sway bars
    : Motor parts (maybe even the Motor? T/A top end)
    : 12 bolt rear end(s)    : 10 bolt reat end(s)  :frontend parts
    
    1972 Chevelle Late Model Street Stock w/cage  feul cell, more.
    	(Minus drive train.)
    
    		WILLING TO TALK ABOUT ANYTING!!!!!!!!!!!
    Plans are being made to just the spare car, and to place the race car
    so if you interested please call now!  Dayle @ 508-897-6983  after 4:30
    or you can give me a call DTN 273-5323 or send mail
    						fiddle::macgillivary
    
    Thanks
    DAVID.

    Anyone got something British?
    
    	Drive spindle, distributor	part #12G4499
    	Drive spindle, oil pump		part #11G0012
    	water pump pulley, '79/'80

    RE:168.37
    
    		Note:  This stuff is still here, and will be junked.
    	even if you know someone that is into restoring a chevelle let
    	them know! lets talk price, barter! you'll win!

    Carl Fisher
    DTN 381-1230 (don't call)
    16BITS::FISHER


    FOR SALE:

    Four 15"x7" alloy wheels with 5 lugs (pattern 5x100), offset for a front-
    wheel-drive car.  They are from a Dodge Omni GLH, but will fit any Dodge
    FWD car with 5 lugs.  These are the same wheels that are on the Shelby Z
    Daytonas.  They may fit other car makes too (I think Chevy Cavaliers use
    the same pattern for example).  If you have 14" wheels on your car now
    and want to try out a lower profile tire, these wheels will solve half
    your problem, and at an attractive price.

    The wheels are in good condition, and currently have 195/50HR-15 Goodyear
    Eagle GTs on them with marginal tread.  These wheels cost ~$200 each from
    the dealer, I'm looking for $100 for all 4, but you MUST take all 4.

				NOW AVAILABLE
		NASCAR WINSTON CUP AND BUSCH GRAND NATIONAL MODELS
		==================================================

1/24th & 1/25th Scale Models of your favorite Winston Cup, Busch Grand
National Cars, and Indy Cars. The models are available in basic or detailed 
versions. Call for exact pricing. Order now, shipments will start after January
1st. All orders shipped UPS.


Winston Cup		Busch Grand National		Indy
------------		--------------------		-------------------
Goodwrench		Rose Stores			Valvoline
Folgers			Kool Aid			Mac Tools
Zerex			Goo Goo Clusters		STP
Coors			Nescafe				Raynor
STP			Lowes Food			Quaker State
Citgo			Carolina Ford Dealers		Domino's
Purolator		Cox Lumber			Pennzoil
Slim Fast		Detroit Gasket			Miller
Big Apple Markets					K-Mart
Trop-Artic						K-Mart/Havoline
Miller							Povimi
Snickers						Amway
Heinz							Cummins
Kodak							Kraco
Country Time/Maxwell House
Havoline
Peak
Quaker State
Motorcraft
Days of Thunder

This is not a complete list and other cars are available.

Contact:

Bob Maheu
24 Mountain Ave.
Fairfield, Me. 04937
(207) 453-6821


    

    FOR SALE :
                           
    Fiberglass front end for a MK I Austin Mini Cooper, one piece(fenders,
    grille, hood [or bonnet] ) 
    
    Provides easy access to engine compartment for tune-ups or drivetrain
    swaps, not recommended for street use but could be used as a cheap fix
    for rust or accident damage. Sold car, no longer need it.
    
    Make an offer $$
    
    Jeff Green @ CSLALL::JEGREEN, DTN 275-3655	
    

    
    Rebuilt Holly 600cfm Double-pumper.
    New Electronic choke.
    Extra parts   
                                              Asking:$90.00
    
    WLDWST::MARTIN_T
    

    I  need to buy a 8 to 10 gal fuel cell for dirt tract racing.  I will
    pay the shipping charges if the price is right.  I need this as soon as
    possible or sooner.  
    dtn:567-5385
    Home:(704)764-7537
    mail:FINALY::HARTSEFC
    
    Thanks in advance.
    

    Carl Fisher
    DTN 381-1230 (don't call)
    16BITS::FISHER


    FOR SALE:

    Four 15"x7" alloy wheels with 5 lugs (pattern 5x100mm), offset for a
    front-wheel-drive car.  They are from a 1985 Dodge Daytona, but will
    fit any Dodge FWD car with 5 lugs or any other car with the same bolt
    pattern (Chevy Cavalier, for example).  If you are interested, but
    don't know if they will fit your car, I will try to find out for you.

    If you have 14" wheels and are interested in trying out a lower profile
    tire, this is an inexpensive opportunity.

    The wheels are in good condition, and currently have 195/50HR-15 Goodyear
    Eagle GTs on them with marginal tread.  These wheels cost ~$200 each from
    the dealer, I'm asking $100 for all 4, but you MUST take all 4.

    Carl Fisher
    DTN 381-1230 (don't call)
    16BITS::FISHER


    FOR SALE:

    Four racing springs to fit a Dodge Charger or Omni, or Plymouth Turismo or
    Horizon.  They will not fit Daytonas.  These springs will lower the car
    approximately 1 inch from stock height and will give a much firmer ride.

    They are on 4 gas-charged struts right now, which can either be sold with
    the springs or removed.  I have a spring compressor and will install them
    on your struts if you prefer.

    They cost more than $300 new, only used 1 season. $100/negotiable.

    For sale Dat. 71 240Z
    
    All new drive train, 3500 mile on motor-trans-diff-all suspension
    parts. New tire and has Recaro seats.
    
    Motor
    3.1 lit. 285hp 280z bottom end late 240 head. oringed block
    shot peened rods childs/albert pistons american racing cam 
    norris springs and extensive headwork that includes 3 angle
    cut and under cutting the valve area in the head. Late 280
    cd ignition and a plasma coated trimill header. Fully balanced.
    It also has 3 40dcoe webbers on a polished cannon manifold.
    The exhaust is also 2 1/2 all the way back custom bend to a 
    turbo muffler.
    All steel braided lines aero quip.

    Transmission
    Late model 280zx brash bushings and all new seals.
    360 kg Dick Barbor clutch.
    
    Suspention
    All delron and Aluminum T/C solid diff mount koni shocks
    quicker springs suspention tech sway bars.
    
    Interior
    Recaro LS seats full SCCA approved roll bar fully carpited and
    5 point harness for the driver.
    
    Tires and Wheels
    CS gold inserts 7x14 with Goodyear NCTeagles.
    
    Exterior
    White with black stripes. Paint in fair condition. No rust!!!
    It has headlite covers and a lower flex dam. 
    
    I will consider all offers and trades. 
    
    I also have a ton of extra parts for this car.
    Dat comp rear end, new set of koni shocks tons of gaskets gauges
    wireing harnasses ect.
    
    Mark cooper cxo3-2/h12
    h> 719-592-5493
    W> dtn-592-5493 or 719-592-5493
    

    1988 Yamaha TZ250U Road-racing motorcycle for sale -
    
    This bike is a proven winner.  It has many spares to go 
    with it and is ready to ride.  
    
    Asking $6,999.
    
    Janice Barry 
    Xcusme::barry
    (603)623-3835
    DTN 264-5888 

            FOR SALE or TRADE


   69 Camaro Drag Car  (Originally SS350 4 spd)
      37K orig miles. Frame rails moved in and tubbed
      for 14" wide tires. 5 year old Candy Apple Red
      paint (always garaged).

      327 +.060 , New Lunati .600 Roller cam and kit,
      12.5 to 1's, 492 angle plug heads, new rings
      and bearings, balanced and clearanced. Victor Jr
      intake with 700 D.P. Holley and Accell Dist w/ 
      tach drive and Moroso cable driven tach.

      Fairbanks Powerglide (1.82 1st) with ATI 5200 stall 
      converter. 12 Bolt rear with new Richmond 5.38 gears. 
      New Mickey Thompson 9" slicks and tubes.

      Too many more details to list.  Not cut up! Could be 
      street legal with exhaust, emergency brake set-up and
      minor wiring changes in engine compartment.
      
      Will trade for 60's- 70's Musclecar or 30's Street Rod 
      (preferably 2 dr sedan). Asking $7500  w/Trailer available.
      Car has only 16 runs (4 weekends) since finished May '89.
      Runs 12.20's @108 all day and should go in the 11's
      with bigger carb.

      Reason for selling: Lost interest due to time, money and
      family. If interested, send VAXMAIL to Scott at
      ARMORY::WARNERS  or call at home after 5:00 PM in
      Westfield, MA. (413) 536-4660

      Scott Warner   

Bike reduced to $5800 or bro.
    
               <<< TIGEMS::USERA:[NOTES$LIBRARY]RACERS.NOTE;1 >>>
                             -< Racers and Racing >-
================================================================================
Note 168.48               THE OFFICIAL FOR SALE NOTE!!!                 48 of 49
XCUSME::BARRY                                        12 lines  29-MAY-1991 22:32
                  -< Yamaha TZ250U Roadracing bike for sale >-
--------------------------------------------------------------------------------

    1988 Yamaha TZ250U Road-racing motorcycle for sale -
    
    This bike is a proven winner.  It has many spares to go 
    with it and is ready to ride.  
    
    Asking $6,999.
    
    Janice Barry 
    Xcusme::barry
    (603)623-3835
    DTN 264-5888 

WANTED

(2) Firestone stickers or decals, somewhere between 6-10" long, and 
1-3" tall.  These are for a 1947 Firestone outboard motor that I'm
restoring, and original decals are unavailable.

Thanks!

Rick Wilson
GOLF::WILSON
NRO5/K4
dtn 234-5218

PRO RALLY CAR - 1983 VW Rabbit GTI.  Top 5 finishes in last 10 divisional 
events, including 5 2nd places.  SCCA log book.  Dirt and mud/snow tires.  
Many spares including suspension, body and engine parts.  Fully documented 
rally history, only 1 DNF in over 20 events.  Delivery can be arranged.  
$2500.  

Dave Burden 
404-924-1170(h)
404-343-5283(w) dtn 343-5283
OASS::BURDEN_D

Car includes:
Sachs Rally struts
16v GTI front springs
5 Michelin rally tires on GTI rims (dirt)
9 knobbies on steel wheels (mud/snow)
Rallysport Northeast modified Autopower cage (welded to frame rails and 
longitudinal bar behind front seats)
Group A head (8v)
3/8" thick aluminum skid plate (Rallysport Northeast)
Lexan rear windows
6 point harnesses
Alfa PRO computer with spare
Lightened flywheel
VW Motorsport motor mounts
VW Motorsport rear axle bushings
90 amp alternator

SPARES:
short block
2 front struts w/springs
taillight clusters
2 sets of A arms
2 doors
hood
2 halfshafts
rear shock w/spring
VW Motorsport A-arm bushings
f/i lines w/injectors
motor mounts
more.....

A few months ago, someone sent me a video tape of some 50's GP cars.  They
wanted a video of my Mt Washington hillclimb tape in return.  I thought it
was Walt Damon, but it wasn't.  If it was you, please send me mail and I will
get the video I owe you in the mail.

Thanks
Dave

    Yeah...I have the Mt. Wash. tape that Dave is talking about...nice
    shifting...
    
    The Mad Weldor....Jim

Carl Fisher
MLTVAX::FISHER
DTN 264-3800 (don't call)


                For Sale - 1 of 2 Chrysler 2.2 liter engines

I've decided I have one too many Chrysler 2.2 liter engines sitting around,
so I'm going to sell whichever one goes first, then after that the other
one is no longer for sale.

Engine #1:

   Fully balanced and blueprinted 1985 2.2 High Output (non-turbo), all
   stock parts (meets SCCA IT or Solo SP regs), ports matched but not
   ported, 10.5:1 compression.  Approx. 2000 (mostly street) miles on it.
   Runs good, pulls hard, est. 120 hp.  Come fully assembled and complete
   minus alternator and air pump.

   Over $3500 into it, asking $2000 (negotiable).

Engine #2:

   - Stock 1985 High Output short block with approx 96k miles on it,
     ran good when I took it out, pistons and bores look good.

   - Stock 1983 cylinder head, unknown miles but clean and works good,
     includes cam and all valve gear.

   - Stock 1985 High Output intake and exhaust manifolds, intake includes
     stock Holley 2 bbl electronic carburator.

   I will assemble this engine for the cost of parts (basically 2 gaskets)
   plus a negotiable (small) fee.  Would like to consider these together, but
   will talk about individual pieces, especially if you want the block.

   $200 takes the whole kit.


Carl

    Moderator(s): Can I enter a note for a Non-DEC friend? If not, feel
                  free to delete it if necessary. Thanks.
    
    Scott Warner
   ARMORY::WARNERS
   DTN 243-2517 (please don't call. This is for a friend. Call him..)
    
    
                      TRAILER FOR SALE
                      ----------------

      U + W Car Trailer, 16ft bed (21ft over-all), slide in ramps, 
    4 wheel electric brakes, good tires, low mileage, excellent condition.
    Color red. Also has winch mount and front jack.

    Reason for selling, ordered enclosed trailer. Asking $1750.

    Call John McCoubrey at home (413)568-8044 or at Brookside
    Automotive in Westfield MA at (413)568-0120 .(12:00-9:00 PM)
   	

1977 Honda Civic 1200 -- Must sell, asking $1900 but very willing 
                         to bargain!

2-time ST4 champion in COM Sports Car Club; 3 wins in 3 events so 
far this season. Turns 1:25s at NHIS on the SCCA configuration (south 
oval, north chicane). Cheap to buy, inexpensive to run. You can't get 
more bang for the bucks!

Mods include:

  o Engine is stroked to 1355cc for increased low-end torque and 
    runs Honda Goldwing pistons for higher compression ratio, intake 
    and exhaust are match-ported, mild grind (3/4) race cam (A jewel, 
    revs without strain to 7500 RPM, smooth and powerful, built to 
    last)

  o 32/36 down-draft Solex carb or 40/40 side-draft Dell'orto 
    (you get both), K&N air filters

  o Custom exhuast header with 4-into-1 collector and 2-1/2 inch 
    pipe to gutted muffler

  o Allison electronic ignition 

  o Electric fuel pump

  o Stock springs cut 1-1/2 coil, Tokico shocks, 19mm swaybars 
    front and rear

  o Brakes from Civic station wagon to increase swept area, 
    Repco Metalmaster semi-metallic pads, drilled rotors 

  o 5 x 13 steel wheels; 9 wheels total, 5 mounted with 185-60/13 
    A008RS Yokohamas (only 3 races old), 4 with street tires

  o Full 5-point Simpson harness

  o Autopower rollbar with front downtube braces for added door 
    protection and chassis stiffness


*Useful* spares! Not a lot of junk, but many miscellaneous parts 
you'll actually use, and mostly new, direct from Honda: tune-up 
parts, switches, bulbs, belts, Repco brake pads, oil filters, and 
more. Some typical used spares also, including radiator, starter 
motor, voltage regulator and more. Talk to me about tools as well 
if you're interested.

Ugly but fast. No money in body, all underneath. This car stops 
and turns with *anything* on street rubber. Well-balanced, easy 
to drive fast. Registered and inspected for street use in addition 
to race. Drive it to the track and win. Fully legal for COM ST4 
class, EMRA ST4, New England hillclimbs in U5, and (I'm told 
anyway) legal to run DSP in SCCA Solo II.

Call me at 603-595-6388 (evenings), 603-881-2854 (days -- DTN = 
381-2854) or send email to Lillian (JARETH::) Hastie.

    
    
       WANTED WANTED WANTED WANTED  WANTED WANTED WANTED WANTED WANTED
    
    
    Blow Shield with Inspection Plate for a GM350. 
    
    This is for a friend who races street stock at Seakonk.
    Please send me mail or call 237-2961.
    
    BAL

    I'm looking for a formula car type 10" diameter, non-dished steering
    wheel.  I'm wondering if any of you RACERS out there might have a cast
    off from an old race car or might know where I might find one (I know
    that J.C. Whitney has cheap ones, but they're a little out of character.)  
    I'm not too concerned about the particular drilling pattern for
    the hub since I don't plan to use it in a race car.  So why do I want
    one?  Well, I'm in the process of building a more realistic "joystick" 
    for my Microprose "World Circuit" F1 simulation game.  You see, I have 
    this naive belief that I will turn quicker laps, hit fewer cars (and 
    walls), and do less "agricultural motoring" with more conventional 
    controls.  BTW, the game is just as good as the posted reviews say it
    is.  I hope it becomes popular enough for for Microprose to issue updates
    or for "Flight Simulator"-type track and car design software to appear.  
    That way I could get some extra track time in my BMW 1600 at NHIS, LRP, 
    WG, etc., during the long winter.
    
    Bjorn.  

I found that the Indy 500 game was much better after I bought a yoke 
instead of just using the keyboard. I also thought of rigging up a 
steering wheel but never go around to it.

Glenn

    I have one ticket for this Sunday's INDYCAR event at NHIS for sale at
    face value of $75. It is a primo seat in Section E North, Row 50, seat
    15. I understand that it is under the shade of the press boxes.
    
    Please contact Mark Stefanski
    		   LANDO::STEFANSKI
    		   DTN 293-5450

Ok, Here's your chance to get into the     FAST      lane!!! Possibly 
the best-

		1986 Ralt RT4, Formula Atlantic

in the country.
		     Entire package, $21K

			Race/Win ready-
		Win at Lime Rock National, this year...
			(by over 20 seconds)
		Pole at Watkins Glen National, this year...
		Led almost every lap at Watkins Glen National, this year...
				...

	Ground up rebuild in '93 including
		Tub completely re-skinned by Stuart Moore '93
		Every rod end and bearing is new...
		CAD designed chassis stiffening components not
			on any other car. 
		Fox shocks with special 2 speed valving.
		Fresh $1000 paint job.
			...

	With spares package including -
		- 10 Momo wheels
		- Spare front and rear wings
		- Mounted rains
		- Spare nose box
			...

My brother is putting the car up for sale for THIS WEEK! If it does 
not sell he will take it to the SCCA Runoffs.

Call Bruce Jankowitz days: 201-397-7067
		     nights 201-361-8922

And get into SCCA's fastest racing class.

    SCCA SPEC RACER:  #375, 9 wheels, car cover, alignment bars, 2 noses,
    		       1992 SCCA New England Region Class Champ - $10,500
    
    EP ELVA COURIER:  with/without engine, 1992 SCCA North Atlantic Road
    	              Racing Champ, 1992/1993 SCCA New England Region Road
                      Racing Champ
    
    CF PRS RHO2 (1980):  with/without engine, 1993 track record at NHIS,
    		         1993 SCCA Club Ford Champ
    
    FF 1600 UPRATED ENGINE:  (NEW) crank, pistons, sleeves, (NEW) cylinder
                             head assembly with ported intake manifold
    
    TOW VEHICLE:  1988 GMC S-15 extended cab pickup truck, 4.3 V-6,
                  fiberglass cap, jump seats, bed mat, heavy duty trailer
                  hitch, OD automatic, 4-wheel drive, AM-FM stereo, Sears
                  white letter radials
     
    Call:  Peter Symonds (603-463-5551) before 8am or after 7pm EST
    

-------------------------------------------------------------------------------
                      carbuffs - Note: 2.500   500 of 501
-------------------------------------------------------------------------------
Topic:   For Sale & Wanted  SEE 2.1 - 2.5 *BEFORE* POSTING!!!
Author:  PARS::REINERT "I think I've been here before...."
Created: 16-May-1994 10:07                                  Number of Lines: 18
Title:   For Sale.. Full Roll-Cage & Pyrotech Extinguisher system
===============================================================================
Eric Reinert                        Scott Reinert
dtn: 264-0808  (603)-884-0808        (603)-434-8401
PARS::Reinert                          Londonderry, NH

My son is looking to sell the following:

Full roll-cage  - removed from a VW Rabbit, will fit
                        same or a smaller vehicle

Pyrotech Extinguisher system - Halon charged, (3) nozzels,
                                manual 'dump' button

Looking for $200.00 for both or will separate @ BO.


It is best to contact Scott directly ( can leave message
on machine) & he will get back to me. You can also contact me .
Items can be brought to MKO facility if you are interested.

    Kim Rivers
    STAR::MDNITE::RIVERS
    DTN 381-0517
    Work at ZK (Nashua), live in Lowell.
    Car is in Lowell.
    
    
    I hope this is the right notesfile for this (I've also posted in
    CARBUFFS and CLASSIFIED_ADS):
    
    
    Is there anybody out there who wants a cheap junker to take to the
    track next spring?  (you know, Enduro racing or whatever it's called in
    these parts)
    
    
    I have a 1977 Chevy Caprice.  It starts, runs strong, needs some work
    to make it street worthy.  Lots of body rust (mainly driver's side
    door).   Tires are all of fairly recent vintage (at least two are less
    then two years old, not all that many miles on them), has a very recent
    battery (replaced this past spring).  The car is ugly, but if you're
    just going to run into somebody on a track, you might not care. :) 
    
    It's big and it's cheap and with the mechanically inclined to do some
    work on it, it would probably even be a great winter car.  I don't want
    something this big anymore -- I don't need it.
    
    I'm not looking for very much -- just want some money to help towards
    the rent. :)   I'd love to see $100 out of it, if you don't think it's
    worth that, make me an offer.  I won't turn down anything reasonable.
    
    
    Cheers,
    
    kim
    
    

           Sounds like a deal.......
           I'll ask around.Lowell is a little ways to travel for
    us(Augusta ME.)but you never know!!!!!!
    

    Cool.  The sooner I can sell it, the better, before it starts snowing
    the plows bury it.  :)
    
    
    Cheers,
    
    kim

    1989 Honda CRX Si - raced SCCA nationall/regionally as ShowRoom Stock
    B, now eligible for IT, many spares; D&D beaver tail trailer w/built on
    toolbox, tire rack; car in Andover, MA; divorce sale-$6500 takes
    everything.  Call Doreen 714-281-6031
    

    steve lafalam
    mkfsa::lafalam
    mko1
    dtn 264-1151
    603-884-1151
    508-297-1428
    winchendon,ma
    
    auto racing magazines.open wheel first issue through present
    [missing oct.dec.93].circle track complete first issue through 
    pressent.over ten years of racing history.will not separate.
    if some one is interested make me an offer.

    Mark Stevens
    MKOTS4::Stevens_m
    dtn: 264-9315
    603-884-9315
    603-886-0753 (h)
    Nashua, NH.
    
    	I have 6 Indy 500 tickets for sale for this years event. They are
    in Grandstand "H" seats 1 - 6 , row BB. These are high up in the stand
    and are between the exit of turn 4 and the entrance to the pits.
    
    These are excellent seats and this year they have built a new stand.
    You can see them out of #3, through the short chute, through turn 4 and
    down the main straightaway.
    
    I am selling them at face value which is $50.00 a piece. 
    
    
    Thanks,
    
    Mark

    Why not take the tickets and head to Michigan and see the REAL INDYcar
    series that day.  I heard that Penske is honoring them??
    
    Pablo
    

RE: .36

There was a rumor that MIS might honor Indy 500 tickets for the US 
500, but, as far as I know, it's not true.

--PSW

    oh.
    
    Oops?!?
    
    Pablo