Conference noted::wireless_lans

340.0. "Win311 not work,but DOS O.K." by TLAV02::CHENSAK () Sun Mar 23 1997 06:21

    Hi
      I have tested the RoamAbout FH PCMCIA card at my customer site, he
    has only Toshiba Notebook with Win for Workgroup, I setup the PCMCIA
    card with the driver version 3.12a, I can connect to their Netware 4.x
    and connect to shared drive on NT 4.0 in DOS mode, but when I run win
    command to enter Windows ,I can't use any network resource ,can't
    browse the other machine. In Network Setup ,I use NDIS that come with
    the RoamAbout driver diskette. (I use rl2setup ,it can communicate
    with the Access Point).. I think that there are no conflict about the
    IRQ or Address, because there is no error in the boot process.
      I test with Win95 on my notebook ,everything works fine.    How can I
    solve this problem? 
    
    thank you in advanced
    chensak

     Please advise me how to troubleshooting ! This is a very high
    potential customer,, they will buy our products a lot.
    
    Thanks

    Hi,
    
    It sounds like you only installed the driver under DOS.  You should be
    installing the driver using the Windows control panel and adding
    network adapter.  If you are only running to a Novell server, you can
    install using the ODI compatible driver. 
    
    Jeff