|
Jeff,
Ok you work for the FH with PROXIM to have their WIN95 tool but if you
want to use the RL2SETUP tool :
(1) with WIN95 in a DOS window it don't works.
(2) with the standard DOS it don't works.
In the first case you have some conflict :
- I think this is a problem with the network...
The second case you have the same thing :
- the drivers (PCMCIA...) aren't loaded.
Do you have tested this tool in WIN95 or do you have some ideas
to resolve this problem.
Thanks,
Thierry.
|
| Thierry,
Yes, the current RL2SETUP will NOT work under Windows 95 and NT
operating systems.
If you boot in 'Command Prompt Only' this utility should work. It will
depend upon whether your PC has an Intel 82365 compatable controller.
It does work with DIGITAL's PCs. Since the DIGITAL PC controller is
not 100% compatible, we recommend running the utility CIRRUS.COM, that
ships with the drivers. This will setup one of the bits to make it
look more Intel compatible. I have run the RL2SETUP with and without
CIRRUS loaded without a problem.
If the PC has a PCMCIA controller that is not at all Intel compatable,
you will need to load Card & Socket Services before the utility can be
run.
Regards,
Jeff
|