|
Hi Diego,
> Windows '95 beeps and recognizes that a new PCMCIA card has been
> inserted, but It only can recognize the board as a Cirrus Logic PCIC
compatible Not Roamabout. The Hinote Ultra does
When it detects the new card does it display "Proxim - RangeLAN2" card
and then prompt you for the OEM provided diskette?
> When I load the Windows '95 drivers I have to tell the Hinote that
> I'll provide the drivers and tell that there is a PC Card insterted
This is not supposed to happen. Windows 95 supports 'plug & play'. If
the PC does not prompt you after you insert the card, you have not
properly removed the driver from a previous attempt to install the
driver or Windows 95 is not correctly installed.
I suggest going into the registry editor and going down the following
path to delete what ever is there and starting over again.
Run REGEDIT from the command prompt or via Start bar 'run' .
select HKEY_LOCAL_MACHINE
System
CurrentControlSet
Services
Class
Net
000X find the one that shows 'digital RoamAbout FH/PC Card"
and with it highlighted, hit the 'del' key.
Then exit out, but before rebooting, delete the RoamAbout files:
\windows\system\RL2WIN95.sys
\windows\inf\RL2WIN95.inf
And then reboot.
After the PC is rebooted, insert the card. If it does not find new
hardware "PROXIM - RangleLAN2" do not continue because you either have
a problem with the PC or with the card.
Good Luck,
Jeff
|