|
This projet go on, yesterday I have installed 10 FH PCs cards and 2
APs to be tested next thurday.
About this projet I have some questions :
- Is there a FH product in Europe (ETSI) that use all the bandwidth
(To have more hopping channels)
- What is the best way in FH to use many PCs in a small area
(Many APs ok but how and the configuation of each AP and PC...)
Thanks,
Thierry.
|
| Hi Thierry,
Depending upon the country, there are different frequencies.
Europe/ETSI FH uses a 43MHz wide band and France uses a 23MHz wide band
as that is all that the country will allow.
As far as setting things up, you should in general put no more that 3
or 4 APs in a given area, as it will start to show a drop in user
throughput with too many APs in a small area.
You can either set them all up using one Domain and all different
Channels or you can set them up on different Domains and different
Channels. They both have there advantages and disadvantages. If you
set them all on the same Domain, you will not have to worry about
setting up your clients differently, you will not have to worry what
happens if one AP goes away (ie someone unplugs it, as it will
certainly not fail). However the disadvantes is that the APs will not
do load balancing, so there is a chance that half could go to one AP,
and one forth to the second two APs. I personally think that I would
set them up on one Domain and see how it works.
Regards,
Jeff
|