| Title: | TME 10 NetView and related products cts |
| Notice: | Bugs-12; Kits-9; ECOs-20 |
| Moderator: | TUXEDO::MINTZ LL |
| Created: | Tue Aug 24 1993 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2257 |
| Total number of notes: | 7838 |
IPMTd the following problem under PDM 2.1.
Will post results here.
SYMPTOM:
The labels for all terminal servers are NOT reflecting the actual name
of
the terminal server. This HAS worked in the past where I could go to
the
server, change the server name, unmanage and manage the object and the
new name would appear. This implied that the name WAS coming from the
name:
field on the terminal server itself (not out of any databases on the
system). Customer stated (and I have reproduced it here) that the
server
names are showing up as the hdwe address, but not the format that is
the
default address on the terminal server. (Default address would be
LAT_08002b123456). In this case the name (label on the object) shows up
as
08002b123456. Here is the output of ovobjprint from my system showing
that
the name is in fact seen as only the hdwe address and NOT any sort of
name
at all.
OBJECT: 1766
FIELD ID FIELD NAME FIELD VALUE
10 Selection Name "08002BA077D8"
14 OVW Maps Exists 1
15 OVW Maps Managed 1
28 TopM Node ID 1702
76 isXXMAP TRUE
78 isBox TRUE
81 isGraph FALSE
83 XXMAP Protocol List "TS/MOP"
104 XXMAP Layout Algorithm Row Column(7)
138 isNode TRUE
160 isServer TRUE
1529 isTerminalServer TRUE
1530 Terminal Server Name "08002BA077D8"
1531 Terminal Server Address
"08-00-2B-A0-77-D8"
1540 MOP Device Type 178
1541 Device Description "DECserver 90M"
1701 TS/MOP Name "08002BA077D8"
1703 isTS/MOP TRUE
2040 default TS/MOP Symbol List 1656
Here is what a LOCAL>SHOW SERVER output is on this server:
Network Access SW V1.3 for DS90M BL80-29 ROM 4.1 Uptime: 92
03:02:13
Address: 08-00-2B-A0-77-D8 Name: ULT90M Number: 0
Identification:
Circuit Timer: 80 Password Limit: 3
Console Port: 1 Prompt: Local>
Inactivity Timer: 30 Queue Limit: 100
Keepalive Timer: 20 Retransmit Limit: 8
Multicast Timer: 30 Session Limit: 64
Node Limit: 200 Software: MNENG2
Service Groups: 0
Enabled Characteristics:
Announcements, Broadcast, Dump, Lock
This behavior is consistant across all types of terminal servers.
DIGITAL RESPONSE:
This problem has been reported to Engineering.
WORKAROUND:
None.
ANALYSIS:
It appears that we are actually reading the address field and plugging
the
response into the name field. This was NOT the behaviour in prior
versions
of PDM.
\
Here are the settings on my PDM lrfs:
# ps -ade | grep pdm
808 ?? I 0:03.85 pdmeventd
809 ?? S 0:15.73 pdmmopnmd -N -T -t -B -b -i tu0
839 ?? S 0:02.38 pdmevcd
849 ?? I 4:24.86 pdmwatchd
850 ?? S 0:02.22 pdmevld
851 ?? S 0:03.74 pdmbrtopd -q 0
852 ?? S 0:01.19 pdmtstopd -q 0 -i ln0
853 ?? S 0:44.91 pdmIVtopd -q 0 -T 1 -N
854 ?? I 0:01.38 pdmstatusd
858 ?? I 58:57.03 pdmIVstsd -P 1 -i -n 1 -c 5 900
859 ?? I 0:04.09 pdmOSIstsd -P 1 -i 900 -n 25
30924 ttyp2 S + 0:00.01 grep pdm
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2220.1 | patch (already!!) | CSC32::PITT | Thu Mar 06 1997 13:19 | 7 | |
CA engineering has supplied a patch for this problem.
If you need it, contact 1-800-354-9000. I'll see about putting it
on a common site so you can access it on your own. Come to think of
it, I'll see about finding (and posting) a common area for all PDM
and TME patches that come out after our engineering folks have
transitioned out. 8-{
| |||||