Conference noted::netview

At this point I would no longer recommend deploying PNV V4.1c

As you can see from the announcement in note 13.6 we will shortly be
releasing the Tivoli branded version of NetView for Digital UNIX.
It is likely better to ask a customer to delay upgrading for a few weeks
rather than suggesting that they upgrade from, say,  V4.1b to V4.1c and then
a few weeks later ask them to install yet another kit.
This is especially true for any customers who may be requiring support
in the near future, since future ECOs will be based on the TME 10 NetView
kit rather than the POLYCENTER kit.

We are continuing to investigate a small number of problems which appear
to be present in certain environments where PNV V4.1b or V4.1c are installed.
However any corrective action for those cases will also be based on the
TME 10 NetView kit.

The TME 10 NetView kit for Digital UNIX will be available for internal
use shortly.  Watch this space for new procedures for acquiring that kit.
If you have an urgent need for PNV V4.1c in the meanwhile please contact
me by Email.

-- Erik

I am pleased to announce the availability of the following internal use
kits on the Digital network:

-TME 10 NetView V4.1c for Digital UNIX
-POLYCENTER NetView V3.1 for NT (SSB version)

These kits can obtained via FTP from the server took.eng21.lkg.dec.com 
(IP address 16.21.144.135). You will need a password to access this FTP server
which can be obtained from Marijane Beaudet (tuxedo::beaudet). 

You will also need to acknowledge via email to Marijane that you accept the
terms and conditions of the following INTERNAL USE LICENSE before obtaining the
password. 

Regards,

Suvankar Ghosh
NetView Product Manager

-------------------------------------------------------------------------

			INTERNAL USE LICENSE AGREEMENT

This TME 10 NetView software is being provided to you solely for the
purposes of internal use within Digital such as managing internal Digital
networks, evaluating NetView or doing a demonstration of the product. 

You must comply with the following restrictions:

o You cannot use this kit for revenue generating purposes of any kind, e.g.,
using the kit to deliver a service, managing a customer network, or selling
this software to a customer. 

o You cannot transfer this kit to anyone else.

o The password for accessing the FTP server must not be given to anyone.

Any violation of these terms could result in legal liabilility to Digital and
disciplinary action against the violator

SUBJECT:   NetView  "Internal  Use  Only"  kits,   pointers,   problem
   reporting procedures, and engineering support contacts.

KITS:  "Internal Use Only" kits are available by sending a request  to
   Marijane Beaudet (TUXEDO::BEAUDET or beaudet@mail.dec.com).  In the
   request include a brief statement about what the kit will  be  used
   for,  acknowledge  that  you  agree  to  the  "Internal Use License
   Agreement", and an e-mail address to which to send the password  of
   the FTP account.

   Kits are located on a FTP server.  The server is a VMS system  with
   an address of took.eng21.lkg.dec.com (16.21.144.135).

   The following files are available:

       "dunixnv.tar" is a TAR file of the "TME 10  NetView  V4.1C  for
                   DIGITAL   UNIX"   product.    This   file  contains
                   260,618,372 bytes.  Requires Digital UNIX  V3.2  or
                   later.   Digital UNIX versions later than V4.0A are
                   not officially supported by Tivoli.
       "readme.txt" is a version of this file which covers NetView for
                   NT and DUNIX.  This file contains ???  bytes.

   Kits may be transferred using FTP in binary mode.   To  obtain  the
   kit via FTP from TOOK execute the following commands:

      >ftp took.eng21.lkg.dec.com
      Connected to took.eng21.lkg.dec.com.
      220 took FTP server (Version 3.0) Ready.
      Name (took.eng21.lkg.dec.com:<current_user_name>): netview
      331 Username NETVIEW requires a password.
      Password <password>
      230 User logged in.
      ftp> bin
      200 TYPE set to IMAGE.
      ftp> get <filename>
      ftp> quit
      221 Goodbye.
      >

EXPANDING D-UNIX FILES:

   Once the files are copied to your UNIX system, expand the kit using
   the tar (tape archive) command by typing:

        tar -xvf <filename>.tar

GETTING GENERAL QUESTIONS ANSWERED:

   A notes file is  available  at  NOTED::NETVIEW-NT  for  NT  related
   questions and at NOTED::NETVIEW for D-UNIX related questions
   If you have problems with the notes file contact the moderator Erik
   Mintz by e-mail at TUXEDO::MINTZ (erik.mintz@lkg.mts.dec.com) or by
   phone at DTN 226-6704 (+1 508.486.6704).

REPORTING PROBLEMS:

   You may report problems by entering them into the Problem  Tracking
   and  Reporting  (PTR)  system via the World Wide Web, or by sending
   e-mail to pnvnt@tuxedo.lkg.dec.com.

   The world wide web interface is accessed by opening  the  following
   URL:

      http://engptr.zko.dec.com:8030/~ptr_docs/ptr_login.html

     Username is:       PNVNT_INT       For POLYCENTER NetView on NT

     Password is:       slic8OfpizzA    The PTR Password is case sensitive!

                   This is "sliceofpizza" with 3 exceptions
                   --------------------------------------
                   e = 8, o = upper case letter O, a = A

   Once logged in, you will see that your default context  is  set  to
   PNV-NT  databases.  You can move to a different product database by
   doing "Select Product".  Please do your best to enter  problems  in
   the  appropriate  database, but don't overly agonize about this, we
   can and do move cases between databases after analysis.

   It is recommended that  you  take  a  few  minutes  to  familiarize
   yourself with this problem reporting system.

   If you have problems utilizing the Internet interface, send  e-mail
   to  the  above  account or call or fax the information to Bob Baker
   at:

        phone:  (508) 486-6702  DTN:  226-6702
        fax:    (508) 486-6755  DTN:  226-6755

   Hints for Getting Started

   When you press "enter" or any button which  enters  data  into  the
   database,  please  wait  for  CONFIRMATION  that  your  TRANSACTION
   completed successfully.  Otherwise you will not be certain that the
   data was entered successfully and you may have to repeat the entry.