| Title: | Bicycling |
| Notice: | Bicycling for Fun |
| Moderator: | JAMIN::WASSER |
| Created: | Mon Apr 14 1986 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 3214 |
| Total number of notes: | 31946 |
I have over time used different tools to cut cable housings with
usually fair to poor results. What I was wondering is what have
some of you had as an experience with the different cable housing
cutters (note: I am not talking about cable cutters, I have a Park
and it is an excellent tool for that job). I know Shimano makes one
but I dont know of any others. I appreciate your input.
Mike
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2026.1 | Nice Tool | WMOIS::FLYE_N | Thu Aug 01 1991 22:59 | 10 | |
The Shimano cutter works perfect. I have cut all brands of housing
with great results. They do not crush the housing. They do on
occasion squeeze the inside teflon liner but an ice pick opens this up
very easily.
Norm
| |||||
| 2026.2 | Shimano | USMRM5::MREID | Mon Aug 05 1991 20:16 | 6 | |
I use Shimano cutters for both housing & cables; excellent tool.
Frank's Spoke 'N Wheel stores (4 of them) also use this cutter in
their work.
Mark
| |||||
| 2026.3 | Very strong | BHUNA::GGOODMAN | Number 1 in a field of 1 | Mon Aug 05 1991 21:37 | 6 |
Another vote for the Shimano tool. I even use it to trim mudguard
stays.
Graham.
| |||||
| 2026.4 | low-tech alternative... | SUSHI::KMACDONALD | sushi: not just for breakfast! | Tue Aug 06 1991 12:17 | 4 |
You can also cut cable housing with your basic wire-cutting pliers,
avail. from any h/w store. Works great, and it may be something you
already have around...
ken
| |||||
| 2026.5 | Fencing Tool | POWDML::JOYCEJ_J | Tue Aug 06 1991 16:17 | 19 | |
Funny you should ask that,
I spent the weekend exchanging my under the bar shifters for
thumb shifter. After crushing the inner linning a couple of
times with using normal wire cutters I search around my junk pile for a
better way. What I ended up using was a fencing tool. This
worked perfectly, clipped the end cleanly and didn't crush the
lining. If you don't know what a fencing tool is (I didn't
untill I showed the thing to a friend) it looks like a big pair
of pliers with a hammer on one jaw and a spike on the other. I
think it is also called either a farmers friend or barbed wire
tool. But the part your interested in is the cutouts on the
joint, given that it cuts barbed wire, cable housing is a snap.
Hope this helps,
Jerry
| |||||
| 2026.6 | buying Shimano | TEMPE::HUFFAKER | Wed Aug 07 1991 22:23 | 3 | |
I am going to buy the Shimano cable cutters. Thanks for the input.
Mike
| |||||